Vcds Lite 12 Rus

SAFETY WARNING: Never start and run your engine inside of a closed garage. Always make sure there is good ventilation to prevent carbon monoxide poisoning.

Carbon monoxide fumes are produced by your engine’s exhaust gases. Compatible Product: VAG KKL 409.1 OBD2 USB Diagnostic Interface Cable 1. Go to and download the VCDS-Lite Software and the Drivers (CDM v2.08.30 WHQL Certified Windows Drivers) 2. Now plug the VAG-COM 409.1 USB cable into your PC. Windows will automatically detect the interface and attempt to find the correct drivers.

Vag 15.70 China cable new added vcds repair chip STC12C2052 and also have original ATMEGA162 + 16V8B + FT232RL full chip. This is Release verison v15.7. VCDS lite v.1.2 (Registered & Activated) FULL VCDS-Lite is a Windows-based Diagnostic tool for VW/Audi/Seat/Skoda for non-dongle interfaces. With VCDS-Lite you can do an automatic scan of all controllers for Fault Codes.

3. Extract and Open the “CDM 2.08.30 WHQL Certified for VAG 409.1” folder that you downloaded. Run the “CDM 2.08.30 WHQL Certified” installer to install the required Windows Drivers for the cable. (You may need to right click the installer and Run as Administrator). 4. After the driver installation is complete, we will need to setup the COM Port for the interface. Go to Control Panel > Device Manager and find the device under “Ports (COM & LPT). It should be called “USB Serial Port” and you will see the COM port number that was assigned to it.

If the COM port number is 1, 2, 3 or 4, you will not need to configure the port. If it is not in the port range from 1-4, you will need to right click the “USB Serial Port”, then click “ Properties”, then click the “Port Settings” tab, then click “Advanced”. Using the drop down menu, select a COM Port Number from 1-4. Click OK and OK to exit out. 5. Connect the VAG-COM 409.1 cable to your car’s OBDII diagnostic port and turn your key to the 2nd turn to turn on your ignition. 6. Run the VCDS-Lite-1.2-Installer that you downloaded to install the VCDS-Lite software. 7. Now you can start the VCDS-Lite 1.2 software from the Desktop shortcut icon. Click on Options.

Under Select COM Port, choose the COM Port Number you selected prior in the Device Manager and click on Test. If the connection was successful, a box will pop up to let you know and you will be able to save the settings and begin using the software. Copyright © 2014 CVO Electronics, Inc.

All rights reserved. Commercial use and distribution of the contents of the website is prohibited without express written consent of the author. Purchase the VAG KKL Cable here.

12.12 is newly released vag diagnositc interface. Vag com 12.12 diagnostic interface can support for VW, Audi, Seat and Skoda models from 1994 to 10. Techsatishmallu malayalam tv serials 2017.

Software version is V12.12. Today, VOBDII.COM will share with you the free download link of Vag com 12.12 Diagnostic Software. Vagcom 12.12 Diagnostic Interface Vag com 12.12 VCDS USB CAN VAG COM 12.12 is 2013 latest version vehicle scan Interface, USB CAN interface Added data types 0B, 0D, 0F to Generic OBD-II Mode 9. Notice: VOBDII.COM online shop has 1:1 obd2 interface available, works with software, support firmware, software online update.